No products in the cart.
Pure Indigo Beard Dye
$10.98
Indigo: A Natural Solo Pigment To Darken All Colors
This is 100% Pure West Bengal Premium Import™ Indigo.
• Use solo to add dark cool hues.
• Use to make brown hair deep black.
• Use to darken* any of our Henna Hair Dye colors.
*Shade darker per Tbsp added at mixing
Most often used in a 2-Step Black process:
Step 1) Apply Pure Henna.
Step 2) Apply Pure Indigo.
IMPORTANT NOTE: Pure Indigo will make existing dark beard colors darker. Very light beards can turn slightly blue or green if Indigo used solo. Additional details in the description below.
Our Henna-Based Hair Dyes Are Your Best Choice: Award-winning herbs are freshly harvested, milled, & sealed—remain rich & potent. Botanicals nourish longer. Pigments saturate deeper.
Always Cruelty-Free. Never Tested on Animals.
This product contains 100% Pure West Bengal Premium Import™ Indigo.
Perfect for:
• Dark bearded (very dark brown to black hair) individuals looking to turn beard rich black—the 100% simple natural way
• African, Indian, Asian hair to darken to deepest black
• The natural light bearded chemist who wants to mix their own super dark brown to black hair color*
*Here’s How: You must color with Pure Henna first. Rinse, No Soap/Shampoo/Moisturizer. Then apply Indigo right after.
IMPORTANT: Blonde/Gray/White hair will always require a double treatment to achieve black hair with Indigo Powder. Natural Indigo was the original pigment source for standard blue denim jeans. Used alone on a light canvas—blonde, gray, white—it will color blue to blue-green.
Light Beard/Hair Solution: Combine our Indigo Powder with our Pure Henna Powder. Your beard will be Super Dark Brown to Rich Black (depends on starting color) after first treatment. And the next application will ensure RICH BLACK.
HEY, BUY AS A BUNDLE & SAVE → (go to Rich Black Bundle)
HENNA/INDIGO 2-STEP HOW TO APPLY
- Follow regular application instructions for Pure Henna (Mix. Apply. Wait Set Time. Rinse)
- Rinse clean without soap or moisturizer—just warm tap water at this step.
- Towel dry beard, and immediately apply Indigo.
- Leave Pure Indigo on for 30 min to one hour.
- Rinse clean with warm tap water.
- Now you may use moisturizer or aftershave (*nothing is best for 24hrs).
Allow beard/hair to naturally transition. As the color matures and the pigments oxidize with the air, you may see various undertones (red, green, blue) and that’s completely normal. After 24 hours you should see the near complete transition. By 48 hours the color will have set and will be super dark, shiny, and full of luster.
1 Packet (3.5 oz/100g) will dye average beard up to 5 times.
OR
1 Packet can dye: hair, eyebrows, sideburns, mustache, and beard at the same time (average hair & beard length).
Our Pure Indigo Hair Dye Is Your Best Choice:
• Organically grown & seasonally hand-harvested in indigenous hearty soils.
• Milled to a fine powder to allow maximum, predictable pigment release.
• Hand-sifted three times to a uniform texture for best application.
• Vacuum-sealed & light-sealed to preserve potency, purity, and freshness.
Always Cruelty-Free. Never Tested on Animals.
NO added chemicals, preservatives or perfumes—just pure natural goodness!
Award-Winning Purity & Quality.
Ingredients: 100% Pure West Bengal Premium Import™ Indigo…(that’s it)
| Weight | 5.3 oz |
|---|---|
| Ingredients | 100% Indigofera Tinctoria (Natural indigo). |
How To Apply
1 Packet (3.5 oz/100g) will dye average beard up to 5 times.
OR
1 Packet can dye: hair, eyebrows, sideburns, mustache, and beard at the same time (average hair & beard length).
1. CLEAN BEARD WELL
Facial hair holds more natural oil than hair on your head and food/drink/moisturizer residue tends to linger on the whiskers. All decrease beard dyeing quality. You have to cleanse the whole beard-area thoroughly. An all natural high-lather soap is recommended for proper cleaning.
- Build thick lather.
- Wash beard-area twice.
- Gentle washcloth or soft face brush recommended (don’t irritate the skin surface).
- Pat dry all facial hair to remove excess water. Slightly damp whiskers are best.
2. MIX PROPER AMOUNT
- Mix what you need only. Length and thickness determine amount:
Mustache = 1 rounded tbsp.
Goatee = 2 rounded tbsp.
Full Beard = 2 to 4 rounded tbsp.
*tbsp = Tablespoon - Use small bowl and spoon to mix.
- Add enough hot water (approx 120º F) to make a paste resembling thick pudding or cake batter.
- Mix very well. The paste should be thick enough to adhere but thin enough to spread.
- Store extra dry powder in air-tight bag/container and in a cool dry place.
NOTE: Excess mixed paste must be discarded (expires rapidly, zero preservatives).
TIP: Colors with indigo (all black & brown dyes) may benefit from little stand time prior to application.
After mixing, allow paste to stand for 10 minutes*—no longer. Mix well again (no extra water), and apply.
*May help deepen the stain by pre-oxidizing the indigo.
3. COVER ALL WHISKERS
- Use included glove to apply paste to whiskers.
- Start from mustache and work down to chin and then up to sideburns.
- Spread generously through all whiskers—cover them completely.
- Leave on for one hour.
- Rinse clean with warm water only.
- No soap on beard for 12-24 hours—just use warm water.
- Avoid washcloth on face for 2 days.
For more application instructions, how to spot test, and gray coverage process go to our detailed application page.
Be the first to review “Pure Indigo Beard Dye”
FAQs
Henna Beard Dye
Quick answer—Yep! Gentle, safe, and all natural.
Super-sensitive skin? The best practice is to spot test prior to application—no matter how pure the ingredients. Apply a small amount behind the ear or neck with a cotton swab. Wait 10 minutes. Observe results. Reactions to henna dyes are very rare.
If no adverse reaction, proceed with full application. And have confidence, it will actually nourish and mildly exfoliate the skin while it colors the whiskers—it only contains our proprietary Henna/Indigo/Herbal fusion. You’re in good hands.
We appreciate gents that like it simple & direct. Below is a recommended program to keep your beardy-face proper.
Many guys perform a “Thursday Night Ritual” (keeps you Weekend-Ready).
- come home from work Thursday evening.
- mix up a quick batch of HCL™ beard dye after eating dinner.
- apply to beard, goatee, or mustache (and/or hair).
- watch 30-60* minutes of favorite Sporting Program. *60 min for initial application
- shower before bed (NO soap on face, just warm water).
- wake up Friday morning and resume normal washing routine.
You’re now Weekend-Ready & all set for a full week of Beardy-Awesomeness!
Coverage. You have to cover all the whiskers for the full application term. If it’s not covered, it will not get color…it’s that simple. So, take your time, and apply to all the tricky spots. Use a combo of your gloved hand and a fine-toothed comb. If in doubt, apply more product.
*Super stubborn gray whiskers? Consider two back-back applications initially (Two 30 min treatments each).
No, most will be gone with your initial rinse. And then any trace will wash off easily when you shower (or wash face with soap).
Consider: We don’t add any synthetic perfumes to our products (many are known toxins & allergens). All HCL™ products are unscented—just the natural plants, flowers, and herbs that are crushed and milled. Hey, they’re a zillion times better than the chemical alternatives (many retail brands have warnings about esophagus and lung burn potential if chronically inhaled—Yikes!)
No, you should be fine. An organic, natural product is always recommended to maximize and maintain best color expression. And be sure to wait at least 24 hours before applying directly to dyed whiskers.
Quick Note: most aftershave products do contain alcohol. And it can be a little drying to the whiskers (dry, brittle whiskers won’t hold color as well). So try to avoid heavy splashing on your beardy-parts.
No, after you apply the dye, wait set time, and then rinse, it’s locked in.
Allow 8+ hours(overnight) to mature the color, and THEN wash face as usual.
You can kiss, eat, and rub all you want without worry.
This depends on a few factors; average beard color duration is about 10-14 days.
Factors that determine color longevity:
1. Whisker quality (coarse or soft) and overall health (protein content in whiskers).
2. How well you clean the whiskers prior to application.
3. How long you leave the product on your whiskers (min 60 min first application).
4. Rate that your facial hair grows (super fast growth may require weekly touch-ups).
5. Frequency of face washing & products used (less washing and mild detergents increase duration).
The Best Practice: Make it a routine. A weekly application. 60 min for initial; then 30 min for touchups.
Load More
Related products
$5.00
$14.98
$10.98
Reviews
There are no reviews yet.